Users Guide

out (OPTIONAL) Enter the keyword out to view BGP notications sent to neighbors
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added ipv6 support.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage Information
To remove all congured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp peer-group updates
View information about BGP peer-group updates.
Syntax
debug ip bgp peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp peer-group peer-group-name updates [in
| out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer-group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates received from
neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to neighbors.
Command Modes EXEC Privilege
404
Border Gateway Protocol