Users Guide

Version Description
9.2(0.2) Changed the default value from global 4q to Dynamic.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
7.8.1.0 Added the global keyword.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
Usage Information
The buffer-profile global command fails if you have already applied a custom buer-prole on an
interface. Similarly, when you congure buffer-profile global, you cannot not apply buer-prole
on any interface.
If the default buer-prole is active, Dell Networking OS displays an error message instructing you to
remove the default conguration using the no buffer-profile global command.
Reload the system for the global buer-prole to take eect.
show buer-prole stack-unit
Display the buer prole that is applied to a stack-unit.
S5000
Syntax
show buffer-profile stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The range is 0 to 11.
If you do not type a unit number, Dell Networking OS displays buer-proles for all
units.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example (single unit)
Dell#show buffer-profile stack-unit 0
Stack-Unit Current Buffer-Profile Next-Boot Buffer-Profile
---------- ---------------------- ------------------------
0 Default (Dynamic) Default (Dynamic)
Dell#
Related Commands
buer-prole (Conguration) – creates a buer prole that can be applied to an interface.
1928
Debugging and Diagnostics