Users Guide
set the management port to no auto negotiate. set speed and duplex
to def
ault values of (100m/full-duplex)
no default-gateway
clear the default gateway ip address
no interface management ethernet ip address
clear the management port ip address and mask
reload
reload entire chassis
show boot blc
show the boot loop counter value
show boot selection
display rom bootstrap bootflash partition
show bootflash
summary display of boot flash information
show bootvar
summary display of operating system boot parameters
show default-gateway
display the default gateway ip address
show interface management ethernet
display the management port ip address and mask
show interface management port config
show the management port boot characteristics
syntax help
show syntax information
BOOT_USER #
boot selection
Set the bootash partition to be used for a ROM bootstrap operation.
S5000
Syntax
boot selection {a | b}
Command Modes uBoot
Command History
Version 9.0(1.0) Introduced on the S5000.
u-Boot
1829