Users Guide

Version Description
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information The write memory command saves the running-conguration to the le labeled startup-conguration.
When using a LOCAL CONFIG FILE other than the startup-cong not named “startup-conguration” (for
example, you used a specic le during the boot config command), the running-cong is not saved to
that le; use the
copy command to save any running-conguration changes to that local le.
Control and Monitoring
167