Users Guide

NOTE: The question mark (?) and the tilde (~) are not supported characters.
Related Commands
show running-cong — views the current conguration.
privilege level (CONFIGURATION mode) — controls access to the command modes within the switch.
login authentication
To congure authentication for console or remote access, apply an authentication method list.
Syntax
login authentication {method-list-name | default}
To use the local user/password database for login authentication, use the no login authentication
command.
Parameters
method-list-name Enter the keywords method-list-name to specify that method list, created in
the aaa authentication login command, to be applied to the designated
terminal line.
default Enter the keyword default to specify that the default method list, created in the
aaa authentication login command, is applied to the terminal line.
Defaults No authentication is performed on the console lines. Local authentication is performed on the virtual
terminal and auxiliary lines.
Command Modes LINE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.6.0.0 Revised introductory and usage guidelines description.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
1626
Security