Users Guide

Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.0.2.0 Introduced on the S6000.
9.0(1.3) Introduced on the S5000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information
The output of this command, shown below, displays the community and isolated VLAN IDs that are
associated with each primary VLAN.
Example
Dell# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
Related Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
switchport mode private-vlan
Set PVLAN mode of the selected port.
S5000
Syntax
[no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan
command.
Parameters
host Enter the keyword host to congure the selected port or port channel as an
isolated interface in a PVLAN.
promiscuous Enter the keyword promiscuous to congure the selected port or port channel
as an promiscuous interface.
1548
Private VLAN (PVLAN)