Users Guide

• Specied in comma-delimited or hyphenated-range format.
• Specied with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related Commands
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
switchport mode private-vlan — sets PVLAN mode of the selected port.
show interfaces private-vlan
Display type and status of PVLAN interfaces.
Syntax
show interfaces private-vlan [interface interface]
Parameters
interface interface (OPTIONAL) Enter the keyword interface followed by the interface type and
slot/port numbers or port-channel number to specify the port(s) for which you
want to display PVLAN information.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage Information This command has two types of display — a list of all PVLAN interfaces or for a specic interface. Examples
of both types of output are shown below.
The following describes the show interfaces private-vlan command shown in the Examples
below.
Field Description
Interface Displays the type of interface and associated slot and port number.
Vlan Displays the VLAN ID of the designated interface.
PVLAN-Type Displays the type of VLAN in which the designated interface resides.
Interface Type Displays the PVLAN port type of the designated interface.
Status States whether the interface is operationally up or down.
1544
Private VLAN (PVLAN)