Users Guide

Related Commands class-map — identies the class map.
match mac vlan
Congure a match criterion for a class map based on VLAN ID.
Syntax
match mac vlan number
Parameters
number Enter the VLAN ID. The range is from 1 to 4094.
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced.
Usage Information To access this command, enter the class-map command. You can match against only one VLAN ID.
Related Commands class-map — identies the class map.
policy-aggregate
Allow an aggregate method of conguring per-port QoS via policy maps. An aggregate QoS policy is part of the policy map (output)
applied on an interface.
Syntax
policy-aggregate qos-policy-name
1508
Quality of Service (QoS)