Users Guide

• Layer 2 or Layer 3 service policies supersede dot1p service classes.
service-class bandwidth-weight
Specify a minimum bandwidth for queues.
C-Series, S-Series
Syntax
service-class bandwidth-weight queue0 number queue1 number queue2 number
queue3 number
Parameters
number Enter the bandwidth-weight. The value must be a power of 2. The range is 1 to
1024.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.0(1.3) Introduced on the S5000.
8.2.1.0 Introduced on the C-Series and S-Series.
Usage Information Guarantee a minimum bandwidth to dierent queues globally using the service-class bandwidth-
weight command from CONFIGURATION mode. The command is applied in the same way as the
bandwidth-weight command in an output QoS policy. The bandwidth-weight command in QOS-
POLICY-OUT mode supercedes the service-class bandwidth-weight command.
strict-priority queue
Congure a unicast queue as a strict-priority (SP) queue.
Syntax
strict-priority queue unicast number
Parameters
unicast number Enter the keyword unicast then the queue number. The range is from 1 to 3.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Quality of Service (QoS)
1495