Users Guide

The following is sample output of the show login statistics unsuccessful-attempts user
login-id command.
Dell#show login statistics unsuccessful-attempts user admin
There were 3 unsuccessful login attempt(s) for user admin in last 12
day(s).
Related Commands
login statistics — Enable and congure user login statistics on console and virtual terminal lines.
login concurrent-session — Congures the limit of concurrent sessions for all users on console and virtual
terminal lines.
show memory
View current memory usage on the switch.
Syntax
show memory [stack-unit id]
Parameters
stack-unit id (OPTIONAL) Enter the keyword stack-unit then the stack unit ID of the S-
Series stack member to display memory information on the designated stack
member.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced this version of the command for the S-Series.
Usage Information The output for show memory displays the memory usage of LP part (sysdlp) of the system. The sysdlp is
an aggregate task that handles all the tasks running on the S-Series’ CPU.
Example
Dell#show memory stack-unit 1
Statistics On Unit 1 Processor
===========================
Control and Monitoring
143