Users Guide

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for the Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre- 6.1.1.1 Introduced on the E-Series.
Usage Information To congure all routers and access servers within a stub, use this command.
Related Commands
router ospf — enters ROUTER OSPF mode to congure an OSPF instance.
area virtual-link
Set a virtual link and its parameters.
C-Series, E-Series, S-Series
Syntax
area area-id virtual-link router-id [[authentication-key [encryption-type]
key] | [message-digest-key keyid md5 [encryption-type] key]] [dead-interval
seconds] [hello-interval seconds] [retransmit-interval seconds] [transmit-
delay seconds]
To delete a virtual link, use the no area area-id virtual-link router-id command.
To delete a parameter of a virtual link, use the no area area-id virtual-link router-id
[[authentication-key [encryption-type] key] | [message-digest-key keyid md5
[encryption-type] key]] [dead-interval seconds] [hello-interval seconds]
[retransmit-interval seconds] [transmit-delay seconds] command syntax.
Parameters
area-id Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from
zero (0) to 65535.
router-id Specify an ID (IP address in dotted decimal format) associated with a virtual link
neighbor.
authentication-key
[encryption-type]
key | message-
digest-key keyid
(OPTIONAL) Choose between two authentication methods:
• Enter the keywords authentication-key to enable simple authentication
followed by an alphanumeric string up to eight characters long. Optionally, for
the
encryption-type variable, enter the number seven before entering the
key string to indicate that an encrypted password will follow.
1308
Open Shortest Path First (OSPFv2 and OSPFv3)