Users Guide

show npiv devices
Display the FCoE and FC devices currently logged in to an S5000 NPIV proxy gateway.
S5000
Syntax
show npiv devices [brief]
Parameters
brief Displays an overview of current server CNA-fabric connections over an S5000
NPIV proxy gateway.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information
Use the show npiv devices command to display information on the server CNA, server-facing
Ethernet and fabric-facing FC ports, and the SAN fabric in each server-fabric connection over an S5000
NPIV proxy gateway.
The following table describes the show npiv devices brief output shown in the example below.
Field Description
ENode-Intf S5000 Ethernet interface (slot/port) to which a server CNA is connected.
ENode-WWPN Worldwide port name (WWPN) of a server CNA port.
FCoE-Vlan VLAN ID of the dedicated VLAN used to transmit FCoE trac to and from the
fabric.
Fabric-Intf Fabric-facing Fibre Channel port (slot/port) on which FC trac is transmitted to
the specied fabric.
Fabric-Map Name of the FCoE map containing the FCoE/FC conguration parameters for the
server CNA-fabric connection.
LoginMethod Method used by the server CNA to log in to the fabric; for example:
FLOGI - ENode logged in using a fabric login (FLOGI).
FDISC - ENode logged in using a fabric discovery (FDISC).
Status Operational status of the link between a server CNA port and a SAN fabric: Logged
In - Server has logged in to the fabric and is able to transmit FCoE trac.
Example
Dell# show npiv devices brief
Total NPIV Devices = 2
----------------------------------------------------
ENode-Intf ENode-WWPN FCoE-Vlan Fabric-Intf Fabric-Map LoginMethod Status
------------------------------------------------------
Te 0/12 20:01:00:10:18:f1:94:20 1003 Fc 0/5 fid_1003
FLOGI LOGGED_IN
1300
NPIV Proxy Gateway