Users Guide

in | out Identify whether the ACL is applied on the ingress or egress side.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage Information MAC Accounting information can be accessed using SNMP via the Force10 MONITOR MIB. For more
information about enabling SNMP, refer to the Dell Networking OS Conguration Guide.
NOTE: Currently, the Force10 MONITOR MIB does not return the MAC addresses in an increasing
order using SNMP. As a workaround, you can use the -C c option in snmpwalk or
snmpbulkwalk to access the Force10 MONITOR MIB. For example: % snmpwalk -C c -v 2c -c
public 133.33.33.131 enterprise.6027.3.3.3
Example
Dell#show mac accounting access-list WORD interface tengigabitethernet 0/1
in
Destination Out Port VLAN Packets Bytes
00:44:00:00:00:02 Te 11/0 1000 10000 5120000
00:44:00:00:00:01 Te 11/0 1000 10000 5120000
00:22:00:00:00:00 Te 11/0 1000 10000 5120000
00:44:00:00:00:02 Te 11/0 2000 10000 5120000
00:44:00:00:00:01 Te 11/0 2000 10000 5120000
Dell#
Related Commands show mac accounting access-list – displays the MAC access list congurations and counters (if congured).
show mac learning-limit
Display MAC address learning limits set for various interfaces.
S5000
Syntax
show mac learning-limit [violate-action] [detail] [interface interface]
Parameters
violate-action (OPTIONAL) Enter the keywords violate-action to display the MAC learning
limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning limit in detail.
interface interface (OPTIONAL) Enter the keyword interface with the following keywords and
slot/port or number information:
• For a port channel interface, enter the keywords port-channel then a
number.
The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
1160
Layer 2