Users Guide

show ip bgp ipv6 unicast summary
Allows you to view the status of all BGP connections.
Syntax
show ip bgp ipv6 unicast summary
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage Information The following describes the show ip bgp ipv6 unicast summary command shown in the Example
below.
Field Description
BGP router
identier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries, route paths, and the amount of memory
used to process those entries.
BGP path attribute
entries
Displays the number of BGP path attributes and the amount of memory used to
process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed and the amount of
memory used to process them.
BGP community
entries
Displays the number of BGP COMMUNITY attributes processed and the amount of
memory used to process them. The show ip bgp ipv6 unicast
community command provides more details on the COMMUNITY attributes.
Dampening enabled Displayed only when dampening is enabled. Displays the number of paths
designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be processed.
1062
IPv6 Border Gateway Protocol (IPv6 BGP)