Users Guide

0x41a19d04 : NdUpdAFMsk 0 : AFRstSe
t 0x41a1a298 : NHopDfrdHdP 0x41a1a3e0 : NumNhDfrd 0 : CfgHdrAFMsk 1
show ip bgp ipv6 unicast lter-list
View the routes that match the lter lists.
Syntax
show ip bgp ipv6 unicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast ap-statistics
View ap statistics on BGP routes.
Syntax
show ip bgp ipv6 unicast flap-statistics [ipv6-address prefix-length]
[filter-list as-path-name] [regexp regular-expression]
Parameters
ipv6-address prex-
length
Enter the IPv6 address in the x:x:x:x::x format then the prex length in the /x
format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
lter-list as-path-
name
(OPTIONAL) Enter the keywords filter-list then the name of a congured
AS-PATH ACL.
regexp regular-
expression
Enter a regular expression then use one or a combination of the following
characters to match:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more sequences).
1056
IPv6 Border Gateway Protocol (IPv6 BGP)