Users Guide

• $ (dollar sign) matches the end of the output string.
Command Modes EXEC Privilege
Command History
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
debug ip bgp ipv6 unicast dampening
View information on routes being dampened.
Syntax
debug ip bgp ipv6 unicast dampening
To disable debugging, use the no debug ip bgp ipv6 unicast dampening command.
Parameters
dampening Enter the keyword dampening to clear route ap dampening information.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
debug ip bgp ipv6 unicast peer-group updates
View information about BGP peer-group updates.
Syntax
debug ip bgp ipv6 unicast peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast peer-group peer-group-
name updates [in | out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group then the name of the peer-group.
updates Enter the keyword updates to view BGP update information.
IPv6 Border Gateway Protocol (IPv6 BGP)
1039