Users Guide

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Related Commands neighbor timers – adjusts BGP timers for a specic peer or peer group.

IPv6 MBGP Commands

Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the Internet and connecting

multicast topologies between BGP and autonomous systems (AS). The Dell Networking OS MBGP is implemented as per IETF RFC

1858.

address family

This command changes the context to subsequent address family identier (SAFI).

Syntax

address family ipv6 unicast

To remove SAFI context, use the no address family ipv6 unicast command.

Parameters

ipv6 Enter the keyword ipv6 to specify the address family as IPv6.

unicast Enter the keyword unicast to specify multicast as SAFI.

Defaults IPv6 Unicast

Command Modes ROUTER BGPV6-ADDRESS FAMILY