Users Guide

Parameters
local-routes (OPTIONAL) Show next-hop information for local routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Example
Dell#show ip bgp next-hop
Next-hop Via RefCount Cost Flaps Time Elapsed
9000::5:2 9000::5:2, Gi 8/38 2 0 0 00:23:22
9000::6:2 9000::6:2, Gi 8/38 2 0 0 00:23:22
9000::7:2 9000::7:2, Gi 8/38 2 0 0 00:23:22
9000::8:2 9000::8:2, Gi 8/38 2 0 0 00:23:22
9000::9:2 9000::9:2, Gi 8/38 6000 0 0 00:23:16
9000::a:2 9000::a:2, Gi 8/38 2 0 0 00:23:22
Dell#
show ip bgp paths
View all the BGP path attributes in the BGP database.
Syntax
show ip bgp paths [regexp regular-expression]
Parameters
regexp regular-
expression
Enter a regular expression then use one or a combination of the following
characters to match:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more sequences).
•
+ = (plus) the sequences in a pattern (1 or more sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1 sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior to entering
the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
• ^ = (caret) the beginning of the input string. If the caret is used at the
beginning of a sequence or range, it matches on everything BUT the characters
specied.
• $ = (dollar sign) the end of the output string.
1030
IPv6 Border Gateway Protocol (IPv6 BGP)