Users Guide

show ip bgp ipv6 unicast inconsistent-as
View routes with inconsistent originating autonomous system (AS) numbers; that is, prexes that are announced from the same
neighbor AS but with a dierent AS-Path.
Syntax
show ip bgp ipv6 unicast inconsistent-as
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast neighbors
Displays information on IPv6 unicast routes exchanged by BGP neighbors.
Syntax
show ip bgp ipv6 unicast neighbors [ipv4-neighbor-addr | ipv6-neighbor-
addr] [advertised-routes | dampened-routes | detail | flap-statistics |
routes | received-routes [network [network-mask]] | denied-routes [network
[network-mask]]]
Parameters
ipv6 unicast Enter the keywords ipv6 unicast to view information only related to IPv6
unicast routes.
ipv4-neighbor-addr
| ipv6-neighbor-
addr
(OPTIONAL) Enter the IP address of the neighbor to view only BGP route
information exchanged with that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specic internal
information for the IPv4 Unicast address family.
ap-statistics (OPTIONAL) Enter the keywords flap-statistics to view ap statistics on
the neighbor’s routes.
1024
IPv6 Border Gateway Protocol (IPv6 BGP)