Users Guide

• set ipv6 next-hop

If the route map is not congured, the default is deny (to drop all routes).

Defaults Not congured.

Command Modes ROUTER BGPV6-ADDRESS FAMILY

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.4.2.1 Introduced on the C-Series and S4810.

Version 8.2.1.0 Introduced on the E-Series ExaScale.

Version 7.4.1.0 Introduced on the E-Series TeraScale.

Usage Information When you enter the redistribute ospf process-id command without any other parameters, Dell

Networking OS redistributes all OSPF internal routes, external type 1 routes, and external type 2 routes.

router bgp

Enter ROUTER BGP mode to congure and enable BGP.

Syntax

router bgp as-number

To disable BGP, use the no router bgp as-number command.

Parameters

as-number Enter the AS number. The range is from 1 to 65535.

Defaults Not enabled.

Command Modes CONFIGURATION