Users Guide

Field Description
LongFramesIn Number of long frames received.
LossOfSync Number of loss of synchronization errors.
ShortFramesIn Number of truncated frames received.
RxLinkResets Number of link resets on received frames.
TxLinkResets Number of link resets on transmitted frames.
TotalLinkResets Total number of link resets.
TotalRxFrames Total number of frames received.
TotalTxFrames Total number of frames transmitted.
RxOineSequences Number of oine sequences received.
TxOineSequences Number of oine sequences transmitted.
TotalOineSequenc
es
Total number of oine sequences.
Rate Information:
Input bytes/sec,
frames/sec, % of
line-rate
Incoming rate of FC trac in bytes per second, frames per second, and percentage of the total line rate.
Output bytes/sec,
frames/sec, % of
line-rate
Outgoing rate of FC trac in bytes per second, frames per second, and percentage of the total line rate.
Time since last
interface status
change
Elapsed time since the operational status of the interface last changed.
Example of the show fc switch Command
Dell# show fc switch
Switch Mode : NPG
Switch WWN : 10:00:5c:f9:dd:ef:24:40
Dell#
Field
Description
Switch Mode Operational mode of an S5000 switch. The default is NPG.
Switch WWN Factory-assigned worldwide node (WWN) name. The WWN name is not user-congurable.
Example of the show running-config | grep switch-mode Command
Dell#Show running-config | grep switch-mode
fc switch-mode fabric-services
Dell#
Troubleshooting Fibre Channel Operation
To investigate problems in the FC interface operation, use the following commands.
Examples of the show command follow this table.
Fibre Channel Interface
337