Users Guide
Displaying FIP Snooping Information
To display information on FIP snooping, use the following show commands.
Table 24. Displaying FIP Snooping Information
Command Output
show fip-snooping sessions [interface vlan
vlan-id]
Displays information on FIP-snooped sessions on all VLANs or a
specied VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE
MAC address and FCoE session ID number (FC-ID), worldwide
node name (WWNN) and the worldwide port name (WWPN).
show fip-snooping config
Displays the FIP snooping status and congured FC-MAP
values.
show fip-snooping enode [enode-mac-address]
Displays information on the ENodes in FIP-snooped sessions,
including the ENode interface and MAC address, FCF MAC
address, VLAN ID and FC-ID.
show fip-snooping fcf [fcf-mac-address]
Displays information on the FCFs in FIP-snooped sessions,
including the FCF interface and MAC address, FCF interface,
VLAN ID, FC-MAP value, FKA advertisement period, and
number of ENodes connected.
clear fip-snooping database interface vlan
vlan-id {fcoe-mac-address | enode-mac-address
| fcf-mac-address}
Clears FIP snooping information on a VLAN for a specied FCoE
MAC address, ENode MAC address, or FCF MAC address, and
removes the corresponding ACLs FIP snooping generates.
show fip-snooping statistics [interface vlan
vlan-id| interface port-type port/slot |
interface port-channel port-channel-number]
Displays statistics on the FIP packets snooped on all interfaces,
including VLANs, physical ports, and port channels.
clear fip-snooping statistics [interface vlan
vlan-id | interface port-type port/slot |
interface port-channel port-channel-number]
Clears the statistics on the FIP packets snooped on all VLANs, a
specied VLAN, or a specied port interface.
show fip-snooping system
Displays information on the status of FIP snooping on the switch
(enabled or disabled), including the number of FCoE VLANs,
FCFs, ENodes, and currently active sessions.
show fip-snooping vlan
Displays information on the FCoE VLANs on which FIP snooping
is enabled.
NOTE: The show fip-snooping fcf command may continue to display FCFs the S5000 Fibre Channel ports
advertise even if the ports are shut down because the FIP snooping feature does not interpret the A-bit in the FIP VLAN
advertisements. When you congure the S5000 as an NPIV proxy gateway, use the show interfaces status
command to check if the S5000 Fibre Channel ports connected to the FCF are up or down.
Examples of the show fip-snooping Commands
The following example shows the show fip-snooping sessions command.
Dell#show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
aa:bb:cc:00:00:00 Te 0/42 aa:bb:cd:00:00:00 Te 0/43 100
FCoE MAC FC-ID Port WWPN Port WWNN
0e:fc:00:01:00:01 01:00:01 31:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:02 01:00:02 41:00:0e:fc:00:00:00:00 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:03 01:00:03 41:00:0e:fc:00:00:00:01 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:04 01:00:04 41:00:0e:fc:00:00:00:02 21:00:0e:fc:00:00:00:00
0e:fc:00:01:00:05 01:00:05 41:00:0e:fc:00:00:00:03 21:00:0e:fc:00:00:00:00
324
FCoE Transit