Reference Guide

clear host
Remove one or all dynamically learned host table entries.
Syntax
clear host name
Parameters
name Enter the name of the host to delete. Enter * to delete all
host table entries.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
clear ip fib stack-unit
Clear all FIB entries in the specified stack unit (use this command with caution, refer to Usage
Information.)
Syntax
clear ip fib stack-unit unit-number vrf vrf-name
Parameters
unit-number Enter the number of the stack unit. The range is from 0 to 11.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to
clear all FIB entries corresponding to that VRF.
Command
Modes
EXEC Privilege
934
IPv4 Routing