Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to configure the S5000 to interoperate with Fibre Channel
devices in SAN fabrics.
Enter the no feature fc command to disable the Fibre Channel command-line
interface and free memory resources allocated to Fibre Channel operation.
Example
Dell(conf)#feature fc
Related
Commands
show interfaces fibrechannel — displays the configuration of a Fibre Channel
interface.
member — alias
Add devices to an alias.
S5000
Syntax
member name
To remove devices from the alias, use the no member name command
Parameters
name Enter the WWPN, port ID, or domain/port.
Command
Modes
ALIAS CONFIGURATION
Command
History
Version 9.1(1.0) Introduced on the S5000.
Example
Dell(conf)# fc alias alias1
Dell(conf-fc-alias-alias1)#member 30:11:11:02:0a:10:01:02
Dell(conf-fc-alias-alias1)#
Related
Commands
show fc zoneset — displays the configured and active zoneset.
show fc zone — displays the configured zone.
Fabric Services Commands
895