Reference Guide

Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the clear counters fibrechannel command to clear the statistics
(counters) displayed in show interfaces fibrechannel command output for a
specified FC port.
Example
Dell(conf)#clear counters fibrechannel 0/11
Clear counters on Fc 0/11 [confirm] yes
Related
Commands
interface fibrechannel — configures a Fibre Channel interface on the switch.
show interfaces fibrechannel — displays the configuration of a Fibre Channel
interface.
create fc-dump-support
Perform a dump of information on S5000 Fibre Channel operation.
S5000
Syntax
create fc-dump-support
Defaults None
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to perform a dump of S5000 Fibre Channel operation and store
the FC dump file in flash:/CORE_DUMP_DIR. Syslog messages are generated at the
start and end of the FC dump file creation.
Example
Dell#create fc-dump-support
890
Fabric Services Commands