Reference Guide

If you only configure the ip udp-helper udp-port command, all the UDP
broadcast traffic is flooded, including ports 67/68 traffic if those ports are part of
the udp-port-list.
Related
Commands
ip helper-address — configures the destination broadcast or host address for the
DHCP server.
debug ip udp-helper — enables debug and displays the debug information on a
console.
show ip udp-helper — displays the configured UDP helpers on all interfaces.
show ip udp-helper
Display the configured UDP helpers on all interfaces.
S5000
Syntax
show ip udp-helper
Defaults none
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Pre-version
8.3.7.0
Introduced on the E-Series ExaScale.
Example
Dell#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
Te 10/2 656, 658
Te 10/3 All
Related
Commands
debug ip udp-helper — enables debug and displays the debug information on a
console.
ip udp-broadcast-address — configures a UDP IP address for broadcast.
886
Interfaces