Reference Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Example
Dell#clear dampening tegigabitethernet 1/10
Clear dampening counters on TeGi 1/10 [confirm] y
Dell#
Related
Commands
show interfaces dampening — displays interface dampening information.
dampening — configures dampening on an interface.
cx4-cable-length
Configure the length of the cable to be connected to the selected CX4 port.
S-Series
Syntax
[no] cx4-cable-length {long | medium | short}
Parameters
long | medium |
short
Enter the keyword that matches the cable length to be used
at the selected port:
• short = For 1-meter and 3-meter cable lengths.
• medium = For 5-meter cable length.
• long = For 10-meter and 15-meter cable lengths.
Defaults medium
Command
Modes
INTERFACE
Command
History
Version 7.7.1.0 Introduced on the S-Series.
Interfaces
793