Reference Guide

Default The RPM in slot R0 is the Primary RPM.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
redundancy protocol
Enable hitless protocols.
Syntax
redundancy protocol {lacp | xstp}
To disable a hitless protocol, use the no redundancy protocol {lacp |
xstp}
command.
Parameters
lacp Enter the keyword lacp to make LACP hitless.
xstp Enter the keyword xstp to invoke hitless STP (all STP modes
— MSTP, PVST+, RSTP, and STP).
Default Disabled
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
8.3.19.0 Introduced on the S4820T.
High Availability (HA)
755