Reference Guide

1. To enable VRRP globally, verify that you are logged in to CONFIGURATION mode.

2. Enter the vrrp-group command then enter the VRRP group ID. The prompt changes to include

(conf-if-interface-type-slot/port-vrid-vrrp-group-id).

Determining Chassis Mode

Chassis mode in Dell Networking OS determines which hardware is being supported in an E-Series

chassis.

Chassis mode is programmed into an electrically erasable programmable read-only memory (EEPROM)

on the backplane of the chassis and the change takes place only after the chassis is rebooted.

Configuring the appropriate chassis mode allows the system to use all the ports on the card and

recognize all software features.

CLI Basics