Reference Guide

auto-save Configure the auto save option to save the downloaded
configuration or script file. They are not saved by default.
When auto save is configured, downloaded configurations
are automatically saved to the startup configuration. Auto
saving the downloaded configurations also requires enabling
the config-scr-download parameter. Downloaded scripts
are automatically saved to the autoexec script.
config-scr-
download
{enable}
(Optional.) Configure whether the configuration file must be
downloaded from the DHCP/file servers (enable).
config-
download
{disable}
(Optional.) Configure if the downloaded file will not be
downloaded from the DHCP/file servers.
dhcp-timeout
minutes
(Optional) Configure the DHCP timeout (in minutes) after
which the BMP reload stops. The range is from 0 to 50. If a
range of 0 is entered, the timeout is 0 (no limit). The default
is disabled.
NOTE:
Dell Networking recommends setting the value to 2 or
higher.
retry-count
number
Configure the number of times to retry loading the Dell
Networking OS image and configuration download. The retry
limit is 0–6. If the retry limit is 0, no retry is performed. The
default is 0.
vendor-class-
identifier
description
(Optional) Enter a brief description for DHCP Option 60.
Maximum is 64 characters long.
NOTE:
This parameter replaces the deprecated parameter user-
defined-string.
Defaults BMP
Switches running BMP 3.0 reload in BMP mode as a DHCP client with all ports
configured for Layer 3 traffic.
Command
Modes
GLOBAL CONFIGURATION
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 9.2(0.0) Introduced support for vendor-class-identifier that
replaces deprecated parameter user-defined-string
Also added support for retry-count.
578
Bare Metal Provisioning (BMP)