Reference Guide

Parameters
peer-group-
name
(OPTIONAL) Enter the name of a peer group to view
information about that peer group only.
detail (OPTIONAL) Enter the keyword detail to view detailed
status information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the
show ip bgp summary
command.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
Version 7.5.1.0 Added the detail option.
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp peer-group (multicast) – views information on the BGP peers in a peer
group.
show ip bgp summary
Allows you to view the status of all BGP connections.
C-Series, E-Series TeraScale, S-Series
Syntax
show ip bgp ipv4 multicast summary
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
562
Border Gateway Protocol