Reference Guide

out (OPTIONAL) Enter the keyword out to view only BGP
updates sent to neighbors.
Defaults Disabled.
Command
Modes
EXEC Privilege
Command
History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
distance bgp
Configure three administrative distances for routes.
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is from 1 to 255. The default is
20.
internal-
distance
Enter a number to assign to routes learned from a router
within the AS. The range is from 1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks
listed in the network command. The range is from 1 to 255.
The default is 200.
Defaults
• external-distance = 20
• internal-distance = 200
• local-distance = 200
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol
539