Reference Guide

Version Description
9.7(0.0) Added ipv6 support.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
To remove all configured debug commands for BGP, enter the no debug ip bgp
command.
debug ip bgp peer-group updates
View information about BGP peer-group updates.
Syntax
debug ip bgp peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp peer-group peer-group-
name updates [in | out] command.
Parameters
peer-group
peer-group-
name
Enter the keywords peer-group followed by the name of
the peer-group.
updates Enter the keyword updates to view BGP update
information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP
updates sent to neighbors.
Command
Modes
EXEC Privilege
Command
History
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Border Gateway Protocol
441