Reference Guide

Usage
Information
To view BGP neighbor resets, use the show logging command in EXEC mode.
The bgp log-neighbor-changes command appears in the show config
command output.
Related
Commands
show logging — views logging settings and system messages logged to the system.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs do
not have their MEDs compared).
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Usage
Information
In Non-Deterministic mode, paths are compared in the order in which they arrive.
This method can lead to Dell Networking OS choosing different best paths from a
set of paths, depending on the order in which they are received from the neighbors
because MED may or may not get compared between adjacent paths. In
Deterministic mode (no bgp non-deterministic-med), Dell Networking OS
compares MED between adjacent paths within an AS group because all paths in the
AS group are from the same AS.
422
Border Gateway Protocol