Reference Guide

interface management port config
Set the speed or transmission mode of the management port.
S5000
Syntax
interface management port config {10m | 100m | 1000m | auto-
negotiate | no auto-negotiate | full-duplex | half-duplex}
Parameters
10m Set the management port to operate at 10 Mbps.
100m Set the management port to operate at 100 Mbps.
1000m Set the management port to operate at 1000 Mbps.
auto-negotiate Set the management port to auto-negotiate its speed with a
peer device.
no auto-
negotiate
Remove auto-negotiation from the management port and
reset it to the default values (transmit at 100 Mbps in full-
duplex mode).
full-duplex Set the management port to transmit in full-duplex mode.
half-duplex Set the management port to transmit in half-duplex mode.
Default The management port transmits at 100 Mbps in full-duplex mode.
Command
Modes
BOOT USER
Command
History
Version 9.0(1.3) Introduced on the S5000.
no default-gateway
Clear the IP address of the default gateway.
S5000
Syntax
no default—gateway
Command
Modes
BOOT USER
Command
History
Version 9.0(1.3) Introduced on the S5000.
224
Boot User Mode