Reference Guide

show buffer-profile stack-unit
Display the buffer profile that is applied to a stack-unit.
S5000
Syntax
show buffer-profile stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit
number. The range is 0 to 11. If you do not type a unit
number, Dell Networking OS displays buffer-profiles for all
units.
Defaults none
Command
Modes
EXEC Privilege
Command
History
Version 9.0(1.3) Introduced on the S5000.
Example (single
unit)
Dell#show buffer-profile stack-unit 0
Stack-Unit Current Buffer-Profile Next-Boot Buffer-Profile
---------- ---------------------- ------------------------
0 Default (Dynamic) Default (Dynamic)
Dell#
Related
Commands
buffer-profile (Configuration) – creates a buffer profile that can be applied to an
interface.
Hardware Commands
These commands display information from a hardware sub-component or ASIC.
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit id {counters | unit 0–0 counters |
cpu data-plane statistics | cpu i2c statistics | cpu party-bus
statistics | cpu sata-interface statistics | stack-port 0–127}
Parameters
stack-unit id Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data.
Debugging and Diagnostics
2091