Reference Guide

Item Description
Interface Lists the interface type, slot and port on which the VRRP
group is configured.
Grp Displays the VRRP group ID.
Pri Displays the priority value assigned to the interface. If the
track command is configured to track that interface and
the interface is disabled, the cost is subtracted from the
priority value assigned to the interface.
Pre States whether preempt is enabled on the interface.
• Y = Preempt is enabled.
• N = Preempt is not enabled.
State Displays the operational state of the interface by using one
of the following:
• NA/IF (the interface is not available).
• MASTER (the interface associated with the MASTER
router).
• BACKUP (the interface associated with the BACKUP
router).
Master addr Displays the IP address of the MASTER router.
Virtual addr(s) Displays the virtual IP addresses of the VRRP routers
associated with the interface.
Example (Brief)
Dell>Interface Grp Pri Pre State Master addr Virtual addr(s)
Description----------------------------------------------------
--------
Te 1/37 1 100 Y Master 200.200.200.200 200.200.200.201
Te 1/37 2 100 Y Master 200.200.200.200 200.200.200.202
200.200.200.203 Description
Te 1/37 3 100 Y Master 1.1.1.1 1.1.1.2
Te 1/37 4 100 Y Master 200.200.200.200 200.200.200.206
200.200.200.207 ... short desc
Te 1/37 254 254 Y Master 200.200.200.200 200.200.200.204
200.200.200.205
Dell>
Usage
Information
The following describes the show vrrp command shown in the following
example.
Item Description
TenGigabitEthern
et 1/3...
Displays the Interface, the VRRP group ID, and the network
address. If the interface is not sending VRRP packets, 0.0.0.0
appears as the network address.
State: master... Displays the interface’s state:
• Na/If (not available)
2072
Virtual Router Redundancy Protocol (VRRP)