Reference Guide

Usage

Information

You must reload Dell Networking OS after executing this command. Use the

upgrade system stack-unit command to copy Dell Networking OS from the

management unit to one or more stack members.

Example

Dell#upgrade system ?

flash: Copy from flash file system (flash://filepath)

ftp: Copy from remote file system, IPv4 or IPv6, (ftp://

userid:password@hostip/filepath)

scp: Copy from remote file system, IPv4 or IPv6, (scp://

userid:password@hostip/filepath)

stack-unit: Sync image to the stack-unit

tftp: Copy from remote file system, IPv4 or IPv6, (tftp://

hostip/filepath)

Dell#upgrade system ftp://username:password@10.11.1.1/FTOS-

SH-9.0.1.3.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!........................................................

..........................................................

....................................!

12946259 bytes successfully copied

Dell#reload

Stacking Commands

1961