Reference Guide

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
With password authentication enabled, you can authenticate using the local,
RADIUS, or TACACS+ password fallback order as configured.
ip ssh pub-key-file
Specify the file used for host-based authentication.
Syntax
ip ssh pub-key-file {WORD}
Parameters
WORD Enter the file name for the host-based authentication.
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage
Information
This command specifies the file used for the host-based authentication. The
creates/ file overwrites the flash://ADMIN_DIR/ssh/knownhosts file and
deletes the user-specified file. Even though this command is a global configuration
Security
1841