Reference Guide

particular secondary VLAN properties are displayed, as shown in the second
Example.
Example
Dell# show vlan private-vlan 10
Primary Secondary Type Active Ports
------- --------- --------- -------------------
10 primary Yes Gi 2/1,3
102 isolated Yes Gi 0/4
101 community Yes Gi 2/7-10
Example
Dell#show vlan private-vlan 102
Primary Secondary Type Active Ports
------- --------- --------- --------------------
10 Primary Yes Po 1
Gi 0/2
102 Isolated Yes Gi 0/4
Related
Commands
private-vlan mode – sets the mode of the selected VLAN to community, isolated,
or primary.
show interfaces private-vlan – displays type and status of PVLAN interfaces.
show vlan private-vlan mapping – displays the primary-secondary VLAN mapping.
switchport mode private-vlan – sets PVLAN mode of the selected port.
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
Syntax
show vlan private-vlan mapping
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.1 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
The output of this command, shown below, displays the community and isolated
VLAN IDs that are associated with each primary VLAN.
1710
Private VLAN (PVLAN)