Reference Guide

Defaults none
Command
Modes
CONFIGURATION (conf-qos-policy-out)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.1.9.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
6.2.1.1 Introduced on the E-Series.
Usage
Information
The unit of bandwidth percentage is 1%. If the sum of the bandwidth percentages
given to all eight classes exceeds 100%, the bandwidth percentage automatically
scales down to 100%.
Related
Commands
qos-policy-output — creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-
service policies to each class.
Syntax
class-map {match-all | match-any} class-map-name [cpu-qos]
[layer2]
Parameters
match-all Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-all to determine
that the packets must meet all the match criteria in order to
be a member of the class.
match-any Determines how packets are evaluated when multiple match
criteria exist. Enter the keywords match-any to determine
that the packets must meet at least one of the match criteria
in order to be a member of the class.
Quality of Service (QoS)
1661