Reference Guide

The show ip pim interface command does not display information
corresponding to the loop-back interfaces.
Example
Dell#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
165.87.34.5 Te 1/10 v2/S 0 30 1
165.87.34.5
10.1.1.2 Vl 10 v2/S 1 30 1
10.1.1.2
20.1.1.5 Vl 20 v2/S 1 30 1
20.1.1.5
165.87.31.200 Vl 30 v2/S 1 30 1
165.87.31.201
show ip pim neighbor
View PIM neighbors.
S5000
Syntax
show ip pim [vrf vrf-name] neighbor
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The following describes the show ip pim neighbor command shown in the
following example.
1612
PIM-Sparse Mode (PIM-SM)