Reference Guide

debug ip pim
View IP PIM debugging messages.
S5000
Syntax
debug ip pim [vrf vrf-name] [bsr | events | group | packet [in
| out] | register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, use the no debug ip pim [vrf vrf-name]
command or use the undebug allto disable all debugging command.
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to view IP PIM debugging messages corresponding
to that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
bsr (OPTIONAL) Enter the keyword bsr to view PIM Candidate
RP/BSR activities.
events (OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
group (OPTIONAL) Enter the keyword group to view PIM messages
for a specific group.
packet [in | out] (OPTIONAL) Enter the keyword packet to view PIM packets.
Enter one of the optional parameters:
• in: to view incoming packets
• out: to view outgoing packets
register (OPTIONAL) Enter the keyword register to view PIM
register address in dotted decimal format (A.B.C.D).
state (OPTIONAL) Enter the keyword state to view PIM state
changes.
timer [assert |
hello |
joinprune |
register]
(OPTIONAL) Enter the keyword timer to view PIM timers.
Enter one of the optional parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer
Defaults Disabled.
PIM-Sparse Mode (PIM-SM)
1591