Reference Guide

• In the S-Series example, a retry (Retries) value of zero indicates that the SWP
mechanism reached the maximum number of retransmissions without an
acknowledgement.
Example (S-
Series)
Dell#show processes ipc flow-control ?
cp Control Processor
| Pipe through a command
show processes memory
Display memory usage information based on processes running in the S-Series or Z-Series system.
Syntax
show processes memory {management-unit | stack unit {unit-id |
all | summary}}
Parameters
management-
unit
Enter the keyword management-unit for CPU memory
usage of the stack management unit.
stack unit unit
id
Enter the keyword stack unit then a stack unit ID of the
member unit for which to display memory usage on the
forwarding processor.
all Enter the keyword all for detailed memory usage on all
stack members.
summary Enter the keyword summary for a brief summary of memory
availability and usage on all stack members.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.7.1.0 Added the management-unit option.
158
Control and Monitoring