Reference Guide

show crypto ipsec sa ipv6
Display the IPsec security associations (SAs) used on OSPFv3 interfaces.
Syntax
show crypto ipsec sa ipv6 [interface interface]
Parameters
interface
interface
(OPTIONAL) Displays information about the SAs used on a
specified OSPFv3 interface, where interface is one of the
following values:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Defaults No default behavior or values.
Command
Modes
EXEC
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.1.(0.0) Introduced on the S4810 and Z9000.
8.4.2.0 Introduced on the E-Series TeraScale.
8.3.19.0 Introduced on the S4820T.
Usage
Information
The show crypto ipsec sa ipv6 command output displays security
associations set up for OSPFv3 links in IPsec authentication and encryption policies
on the router.
Related
Commands
show crypto ipsec policy – displays the configuration of IPsec authentication and
encryption policies.
Example
Dell#show crypto ipsec policy
Dell#show crypto ipsec sa ipv6
1570
Open Shortest Path First (OSPFv2 and OSPFv3)