Reference Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
Field Description
Source QID /Tx
Process
Source Service Identifier
Destination
QID/Rx Process
Destination Service Identifier
Cur Len Current number of messages enqueued
High Mark Highest number of packets in the queue at any time
#of to / Timeout Timeout count
#of Retr /Retries Number of retransmissions
#msg Sent/Msg
Sent/
Number of messages sent
#msg Ackd/Ack
Rcvd
Number of messages acknowledged
Retr /Available
Retra
Number of retries left
Total/ Max Retra Number of retries allowed
Important Points:
• The SWP provides flow control-based reliable communication between the
sending and receiving software tasks.
• A sending task enqueues messages into the SWP queue3 for a receiving task
and waits for an acknowledgement.
• If no response is received within a defined period of time, the SWP timeout
mechanism resubmits the message at the head of the FIFO queue.
• After retrying a defined number of times, the SWP-2-NOMORETIMEOUT timeout
message is generated.
Control and Monitoring
157