Reference Guide

Version Description
7.8.1.0 The output of the show environment fan command for
the S-Series is changed to display fan speeds instead of
showing the fan status as up or down.
Usage
Information
The following example shows the output of the show environment command.
Example (all)
Dell#show environment
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2
Speed Fan3 Speed
---------------------------------------------------------------
---------------------
0 0 absent
0 1 up up 12000 up 12000 up
12000 up 12000
0 2 up up 12000 up 12000 up
12000 up 12000
0 3 absent
Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus
---------------------------------------------------------------
-------------
0 0 up AC up
0 3 up AC up
-- Thermal Sensor Readings (degree C) --
-- Unit 0--
S0 S1 S2 S3 S4 S5 S6 S7
---------------------------------------------------------------
-------------
BASE BOARD 70 38 41 42 43 57 39 40
Module 0 43 44 36 37 33 31 - -
Module 1 43 44 36 31 32 31 - -
Module 2 42 42 36 32 30 31 - -
Module 3 42 43 36 31 31 31 - -
Dell#show environment thermal-sensor
-- Thermal Sensor Readings (degree C) --
-- Unit 0 --
S0 S1 S2 S3 S4 S5 S6 S7
---------------------------------------------------------------
BASE BOARD 40 26 26 29 28 41 26 28
Module 0 30 31 22 19 23 20 - -
Module 1 28 29 21 - - - - -
Module 2 20 25 24 21 22 23 - -
Module 3 20 25 24 - - - - -
Control and Monitoring
149