Reference Guide

fka-adv-period
In an FCoE map, configure the time interval used to transmit FIP keepalive (FKA) advertisements.
S5000
Syntax
fka-adv-period seconds
Parameters
seconds Enter the time period (in seconds) used to send FIP keepalive
messages to peer devices. The range is from 8 to 90
seconds.
Defaults 8 seconds
Command
Modes
FCOE MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
To delete the FIP keepalive time period from an FCoE map, enter the no fka-
adv-erpiod
command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
interface vlan (NPIV proxy gateway)
Create a dedicated VLAN to be used to send and receive Fibre Channel traffic over FCoE links between
servers and a fabric over an S5000 NPIV proxy gateway.
S5000
Syntax
interface vlan vlan-id
Parameters
vlan-id Enter a number as the VLAN Identifier. The range is 1 to
4094.
Defaults Not configured.
Command
Modes
CONFIGURATION
1442
NPIV Proxy Gateway