Reference Guide

Command
Modes
FCOE MAP
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The FCF priority you assign to an S5000 is used by server CNAs to select an
upstream FCF to use for a fabric login (FLOGI).
To remove a configured FCF priority from an FCoE map, enter the no fcf-
priority
command.
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fcoe-map— displays the Fibre Channel and FCoE configuration parameters in
FCoE maps.
feature fc
Enable Fibre Channel capability on the S5000.
S5000
Syntax
feature fc
Defaults The S5000 is not enabled to operate in Fibre Channel mode.
Command
Modes
CONFIGURATION
Command
History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to configure the S5000 to interoperate with Fibre Channel
devices in SAN fabrics.
Enter the no feature fc command to disable the Fibre Channel command-line
interface and free memory resources allocated to Fibre Channel operation.
Example
Dell(conf)#feature fc
Related
Commands
show interfaces fibrechannel — displays the configuration of a Fibre Channel
interface.
NPIV Proxy Gateway
1441