Reference Guide

Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
ipv6 nd raguard policy policy-name — Defines the router advertisement (RA) guard
policy name and enter the RA guard policy configuration mode.
router-lifetime
Set the router lifetime.
Syntax
router—lifetime value
Parameters
value Enter the router lifetime in seconds. The range is from 0 to
9,000 seconds.
Defaults none
Command
Modes
POLICY LIST CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and
Z9000 switches.
Related
Commands
ipv6 nd ra-guard enable — Allows you to configure the RA guard related
commands.
ipv6 nd raguard policy policy-name — Defines the router advertisement (RA)
guard policy name and enter the RA guard policy configuration mode.
Neighbor Discovery Protocol (NDP)
1411